Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches\u001D from end of bar
Yakima's Control Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory track systems). The Control Towers attach to your factory track system with Yakima's vehicle-specific landing pads and they have die-cast components for a sturdy hold.
DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima's FourTimer hauls 4 bikes of virtually any style, from children's bikes to big DH bikes to fat bikes. • Transport four bikes regardless of frame design, suspension or wheel size • Ideal for fat bikes, kids' bikes, and fenders • Secures bike by the frame with padded arms • Low tray height for quick and easy loading and unloading of bikes • Folds down with bikes loaded for rear-of-vehicle access. Folds up when not in use • Easily converts into 2-bike carrier
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
Great for families, double dates, or bringing your entire bike quiver, the HoldUp EVO +2 turns the 2-inch HoldUp EVO into a four-bike hauler. It’s versatile enough to handle most bikes, from BMX to fat tire bikes. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. The whole unit can still tilt down and out of the way with bikes loaded, for easy rear-of-vehicle access, and the empty trays fold up and out of the way when not in use. Included SKS locks for each bike give you peace of mind. - Attaches to the 2-inch HoldUp EVO to carry two additional bikes - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Trays easily adjust to reduce bike-to-bike interference - Tilts down with bikes loaded for rear-of-vehicle access - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20-inch to 29-inch wheel sizes and tires up to 5-inch wide - Integrated SKS (Same Key System) locks included for added bike security - Compatible only with 2-inch version of HoldUp EVO & HoldUp
Roll out on your next boat trip with these easy loading hull rollers. The Dynaflex" padded rollers protect and grip your hull, then lock into place once loaded. Fits many hull shapes with pivoting bases. - Includes 2 saddles per package; add another set of Yakima saddles or rollers to complete your custom loading system - Easy loading and unloading with U-shaped rollers - Features rollers mounted on pivoting bases that fit many kayak and canoe hull shapes - Dynaflex padded rollers protect and grip your hull, then lock into place once loaded - Fits Yakima round or square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Minimum crossbar spreads of 24 inches\u001D or more
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24\u001D inches or more
$48.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Your boat will ride like royalty atop your roof with this easy-to-load saddle system. It's a stable ride on protective pads with Dynaflex" grips that hold snugly once the heavy-duty straps are tightened. Pair with a set of of HullyRollers for even easier loading. - Provides easy loading and a stable ride for your boat Pads protect the hull, and Dynaflex grips provide a snug hold when you tighten the straps - Each set includes one Heavy-Duty Strap and one Bow/Stern Tie-Down - Premium heavy-duty straps with coated metal buckles protect boat and vehicle Comes with two saddles per package - Add HullyRollers or another pair of Mako saddles (both sold separately) for optimal stability and ease - Fits rack systems with round and square crossbars - Fits factory and aerodynamic crossbars with Mighty Mounts - Supports one boat up to 80 lb - Minimum crossbar spreads of 24 inches\u001D or more
$30.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's RailGrab Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory roof racks). The RailGrab Towers attach to your factory crossbars and they have die-cast components for a sturdy hold.
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Say hello to the SUPPup—a faithful companion with soft padding to hug your board, self adjusting slider for varying board widths, and straps that stow away for travel. - Fully assembled out of the box - Fits Yakima round, square, factory and aerodynamic crossbars - Integrated strap management stows strap ends for travel - Soft padding cradles your board - Slider adjusts to boards up to 36" wide - Includes everything needed to carry up to 2 SUP boards - Minimum crossbar spread of 24” or more
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
Light, strong, and always ready to roll, the SingleSpeed hitch rack is built for solo travel. Ready for any kind of bike – road, mountain, fat, or BMX – the StrongArm hook ensures your bike is secure and protected, holding the bike tight by the wheels, and babying those carbon frames and painted surfaces. The locking SpeedKnob makes install a breeze & an integrated SKS bike lock is included to keep your two wheeler secure. - Light, compact, and built for one bike, this hitch rack makes for quick & easy solo travel - Lightweight, hitch mounted tray rack that carries one bike without frame contact - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - Folding wheel cup and compact design keeps the rack out of your way when not in use - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, & BMX - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20” to 29” wheel sizes and tires up to 5-inch wide - Integrated SKS (Same Key System) lock included for added bike security - Fits both 1.25-inch & 2-inch hitch receivers right out of the box
Whether you and your crew enjoy leisurely stand-up paddling or an intense session surfboarding, the SUP Crossbar Pads loves both. Made of heavy-duty ballistic nylon, these 30” pads give you full coverage on aerodynamic crossbars. - Ideal for SUPs and Surfboards - Heavy-duty ballistic nylon construction - Full coverage 30” Crossbar Pad with Velcro closure - Fits factory and aerodynamic crossbars - Works great with BigStack, KayakStacker or Heavy-Duty Straps - Comes with 2 pads per package
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool
The Artificial Rain Gutters from Thule let you attach any of their classic cargo racks (sold separately) to vehicles that lack integrated rain gutters. These are most commonly installed on camper tops, pickup truck caps, and Jeep Wrangler tops. This set includes four Artificial Rain Gutters and rubber gaskets to protect your car's finish.
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound
Fully lockable multipurpose holder for carrying paddles, oars, and masts. - Fully lockable holder for paddles, masts, oars, and other similar sized items. - Fits items up to 4 inch/10 cm diameter - Capacity to transport and lock multiple paddles - One Key System - can be locked, lock (1) sold separately - Equipment protection provided by rubber cushion - Fits Thule square, xsporter, rapid aero, and professional series bars, round bars, and most factory installed cross bars - Integrated cable secures items and deters theft of expensive paddles
Premium saddle combination guides and sets the kayak for smooth loading, unloading and transportation. - Rear-mounted Hydro-Glide felt lined saddles guide kayak and provide low friction loading/unloading. - Front-mounted Set-to-Go form fitting saddles grip the surface of the hull for increased lateral stability and protection - Integrated rubber pads protect the hull and help hold the kayak in place for transportation - Carries 1 kayak and requires 1 person to load and unload - Includes all straps to transport 1 kayak - Up to 2 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately)
Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily to available bolt heads under the hood - Boat bow & stern tie-down loops that are fastened inside the vehicle hood and protrude out through the edge to provide a secure loop to attach tie-downs
Page 1 of 2 Next page