Tools & Tuning

Fluor Free Hydrocarbon wax -8°C to -14°C. Good race wax in very cold conditions. Good in dry conditions. - Durable wax for cold conditions - Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

Fluor Free Hydrocarbon wax -2°C to -8°C. Good training wax. Easy to warm in. Good in dry conditions. - A great wax for typical winter conditions - Medium hard and easy to apply - Versatile base prep, training, and racing wax Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F). A wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. CH07X is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

The Swix F4 Glide Wax Liquid is an all temperature liquid wax for skis and snowboards. Waxing your skis or snowboard can but a better feel in your equipment and have you charging down the mountain. With a foam applicator and felt polisher, this handy pocket size bottle is perfect to pack in your equipment bag. Keep your winter toys in top shape by applying the Swix F4 Glide Wax Liquid to their base. - Easy wax for all conditions - Very easy to apply - Handy pocket size

F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application

F4 is a universal glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax specifically for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

Wall thermometer with waxing tips. - Wall thermometer - For your house or cabin wall - For all skiing enthusiasts - Practical waxing guide

Round outdoor wall thermometer for cross-country skiing. Perfect for your cabin wall. Shows you which wax or klister to use for a perfect day skiing. Hang in the shade. Ø 30 cm.

Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.

Great together with SWIX glide wax cleaner! All-round nylon brush. Good quality all-round nylon brush for cross-country/alpine skis and snowboards.

Medium bronze brush. Ø 0.15 mm. First brush used after scraping. For brushing glide wax out of the structure. 10 strokes. Blister pack w/alarm label. Features: - Bronze brush - Swix waxing brush - Solid hand brush - High quality - Must have for ski waxers

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

File cleaning brush. - File brush - For cleaning files - For all maintenance of steel edges - Convenient format

Medium coarse file, not chrome-plated. 20 cm, 12.5 tpcm. Good for filing both side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For all maintenance of steel edges - Sharp and exact

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.

Practical groove scraper. Handy format. Practical groove scraper for wax removal.

Handy size thermometer to measure snow temperature. - Solid plastic protective case - Scaled from -30 to +50 Celsius degrees - Perfect when travelling

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Extra hard rubber grinding stone for tuning and maintaining steel edges.

Aluminum file guide for base edges, 0.75°. - File guide - For filing base edges - For alpine skiers and snowboarders - Precise

Sidewall cutter for Racing. A high-quality, easy-to-use sidewall cutter. Removes plastic on sidewalls of skis and snowboards to expose more of the steel edges. Makes filing steel edges easier. Supplied with round and square titanium blades. - Sidewall cutter - For removing plastic material - For alpine skiers and snowboarders - Precise and efficient

Very high-quality sidewall cutter. Used by World Cup service personnel. Precision tool. Removes plastic on sidewalls of skis and snowboards to expose more of the steel edges. Makes filing steel edges easier. - Sidewall cutter - For removing plastic material - For alpine skiers and snowboarders - Precise and efficient

Coarse Diamond Stone with plastic support. Red. 100 mm. Deburring and maintenance stone. Works great for maintaining sharpness and smoothness. Good price.

Handy tool for setting steel edges on skis and snowboards. Takes up little space in your pocket. - Diamond tool - For polishing steel edges - For alpine skiers and snowboarders - Handy pocket size

Medium diamond grindstone for skis and snowboards. 100 mm. Medium diamond grindstone with plastic plate. Yellow. 100 mm. The grindstone is used to tune the edges. Red and yellow are the two grindstones you must have. Great value. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact